3D PRINTING
The Z-Corp 310 3D printer creates physical prototypes directly from 3D CAD files.
Parts are created by first laying down a thin layer of powder. The print head
then passes over the powder placing binder onto the powder where it is bonded to
the previous layer. The chamber on the left which holds the feed material
(gypsum-based powder) is then raised
one layer thickness and is rolled over to the
build chamber on the right. The print head then binds the required material
together as previous; the process is repeated over and over until the model is
completed. The material that is not bonded by the print head remains in place to
support the model. Once dried, the model is removed and sealed with epoxy for
strength.